pressure measuring transducer

 
A - 10
 (relative pressure, zero output at atmospheric pressure)


 

 

 
General application:  
Suitable for all applications in machine and systems engineering,
automative technology as well as cooling and air conditioning technology.

                                                                          

Specification:
measuring range (MB):
overload limit (ÜL):
burst pressure (BD):		 1    1.6    2.5    4     6   10     16    25   40    60    100    160       250    400     600
2    3.2       5    8   12   20     32    50   80   120   200     320      500     800  1.200
5     10     10   17   34   34   100  100  400   550  800   1,000   1,200  1,700  2,400
output signal: 4 to 20mA, 2-wire, RA (Ohm) < (UV(V) - 8V) / 0.02A
0 to 10V,    3-wire, RA > 10 kOhm
(other output signals upon request)
auxiliary energy: 8 to 30VDC (for output 4 to 20 mA)
14 to 30VDC (for output 0 to 10V)
accuracy: * < 1.0% FS (optional. < 0.5% FS)
(*=non-linearity, hysteresis, zero point and scale error incl.. corresponding with error of measurement per IEC 61298-2
Sensor adjusted in vertical mounting position with lower pressure connection)
 
non-linearity: <0.6% FS (optional <0.3% FS)
zero offset: <0.5% FS (typ.), <0.8% FS (max.)
optional: <0.15% FS (typ.), <0.4% FS (max.)
hysteresis: <0.16% FS
repeatability: <0.1% FS
long-termed drift: <0.1% FS (according to IEC 61298-3)
response time: t90 <4 ms
perm. temperature of meas.media: 0°C to +80°C (optionally -30°C to +85°C)
ambient temperature: 0°C to +80°C (optionally -20°C to +80°C)
storage temperature: -20°C to +80°C
temperature compensated area: 0°C to +80°C
temperature error in comp. area: <1.0% FS (typ.), < 2.5% FS (typ)
material: Parts coming into contact with pres. media
- pressure connection: 316 L
- pressure sensor:       316 L (as of 10bar rel. 13 to 8 PH)
- housing:                   316 L
pressure connection: G 1/4A (= 0,635 cm), DIN 3852-E with NBR sealing
protection rating: IP65 resp. IP67 with cable
electric connection: elbow-type plug acc. to DIN 43650 or connection cable, cable length 1.5m
electric protection: reverse voltage and short-circuit protection
weight: approx. 80g

 

Options,Accessories (against upcharge):
absolute pressure (0 to 1 bar abs. to 0 to 25 bar abs.)
Higher sensor accuracy (class 0.5) upcharge:
Extended temperature range upcharge:
Output signal 0 to 10V upcharge:
Fixed connecting cable, 2m with bend protection upcharge:
                                       (instead of elbow-type plug, IP67)
GWA 1214 V4A thread adapter G 1/2" (= 1,27 cm) with international thread G1/4" (= 0,635 cm)and external thread G1/2" (= 1,27 cm)

(c) 1999-2010 GSG Geologie-Service GmbH, Wuerzburg  -  www.geologie-service.com
Phone +49/931 99105-80; FAX: +49/931 99105-90

- All rights reserved -