|
|
EASYBUS - sensor modules for temperature
Type EBT - IF1
|
|
|||
| These EASYBUS
temperature sensor modules are directly connected with interface converter or EASYBUS without any additional housing.
They differ concerning the standardized
measuring ranges |
| SPECIFICATION: |
| Measuring ranges: | When
choosing the probe length, you have to take care that the
working temperature maximum allowed in the cable cover is not exceeded. |
|
| EBT-IF1: (Standard) | -30 to +100°C | |
| EBT-IF2: (Standard) | -30 to +100°C | |
| EBT-IF3: (Standard) | -70 to +400°C | |
| Further measuring ranges (max. -200 to +500°C) upon request! | ||
| Measuring probe: | internal pt1000 sensor | |
|
Accuracy: (at nominal temperature = 25°C) |
Electronics: | +0.2% of meas. value +0.2°C |
| Meas. probe: | Standard: DIN Kl. B (higher sensor accuracy optionally possible) | |
| Interface: | EASYBUS interface Fix mounted 2-polie cable, cable length approx. 1m for direct connection with interface converter or EASYBUS. |
|
| Ambience of electronics (in cable cover): | ||
| Working temperature: | -25°C to +70°C | |
| Relative air humidity: | 0 to 100% |
|
| Housing: | Stainless steel housing | |
| Dimensions: | (dependent on sensor construction) | |
| Cable cover: | Diameter 15x35mm (without screw connection) | |
| Probe length FL: | 100 (IF1 and IF2) resp. 50mm (IF3) or upon request | |
| Probe diameter D: | 6mm or upon request (available diameters: 4, 5, 6 or 8mm) |
|
| Length of collar tube: | 100mm (at IF3) or upon request | |
| Thread: | G 1/2" (= 1,27 cm) (IF 2 and IF 3) or upon request (available threads: M8x1, M10x1, M14x1,5, G 1/8" (= 0.3175 cm), G 1/4" (= 0.635 cm), G 3/8" (= 0.9525 cm), G 3/4" (= 1.905 cm)) |
|
| Min-/Max-memory: | the min./max values are memorized | |
| Adjustment: | via interface by setting zeropoint and inclination | |
| OPTIONS: |
| FL | longer tube, price each beginning 100mm |
| HL | longer collar tube, price each beginning 100mm |
| D | other probe
diameter (available diameters: 4, 5, 6 or 8mm) - please note on your order - without surcharge |
| G | other thread (available threads: M8x1, M10x1, M14x1,5, G 1/8" (= 0,3175 cm), G 1/4" (= 0,635 cm), G 3/8" (= 0,9525 cm), G 3/4" (= 1,905 cm)) - please note on your order - without surcharge |
Further informations about EASY-BUS system
(c) 1999-2010 GSG Geologie-Service GmbH, Wuerzburg -
www.geologie-service.com
Tel. +49/931 99105-80; FAX: +49/931 99105-90
- All rights reserved -
