|
|
| Digital Manometer for over/under pressure or pressure difference Functions:
|
|
GDH
200-13
 |
Specification: |
|
Measuring range: |
0.0 to 199.9 resp. 200.0 to 1999 mbar (hPa) 0.0 to 199.9 resp. 200.0 to 1500 mmHg 0.00 to 19.99 PSI
|
|
| Resolution: | automatic change 1/0.1 | |
| Accuracy: (at nominal temperature and automatic zero point-adjustment) |
Meas. range up to 2000mbar: + 0,2% FS hysteresis and linearity + 0,4% FS temperature drift from 0 to 50°C |
Meas. range up to 200mbar: + 1% FS hysteresis and linearity + 2% FS temperature drift from 0 to 50°C
|
| Overload: | max. 4000 mbar | |
| Sensor: | piezoresistive relative pressure sensor | |
| pressure connection: | 2 pressure port sockets made of nickel-plated brass, for flexible pressure tubings 6x1mm (4mm inner-diameter) ca. 11mm protrusive | |
| nominal temperature: | 25°C | |
| Working temperature: | -25 to +50 °C | |
| Display: | 3 1/2-digit , 13mm high LCD-Display | |
| Pushbuttons: | 3 membrane keys | |
| power supply: | 9V battery | |
| power consumption: | approx. 250 µA (=1,200 operating hours) | |
| Low battery warning: | "BAT" automatic | |
| housing: | impact resistant ABS plastic housing | |
| Dimensions: | ca. 106 x 67 x 30mm (HxBxT) without pressure port sockets | |
| Weight: | ca. 135g (incl. battery) | |
| Automatic-Off-function: | 1..120min (can be deactivated either) | |
| Min/Max-value memory: | Memorizing of max. and min. values | |
| Zero point adjustment: | automatically | |
| slope adjustment: | manually | |
| Tare function: | Display value and min-/max value are set to null | |
| Accessories for GDH series | |
| Tubes, adapters etc. |
(c) 1999-2010 GSG Geologie-Service GmbH, Wuerzburg -
www.geologie-service.com
Tel. +49/931 30 40 8-0; FAX: +49/931 99105-90
- All rights reserved -
