Universal Measuring and Regulating Device

  • universal inputs for normalized signals, frequency,
    Pt100, Pt1000 and thermocouples
  • two integrated switching outputs
  • configurable as display or controller (5 switching functions)
  • quick regulating and controlling stage
  • extensive eslf-monititoring and diagnostic system
  • serial interface (max. 240 devices can be combined)
  • limit functions, digital filter, min-/max value memory
  • alarm delay selectable

GIA20EB

GIA 20 EB

 

specifications:
measuring input: universal input for
standardized signal: 4 to 20mA, 0 to 20mA, 0 to 1V, 0 to 2V, 0 to 10V, 0 to 50mV
esistance thermometer: Pt100(3-wire), Pt1000 (2-wire)
thermocouples: types J, K, N, S, T
frequency, rotational speed: TTL-signal, switching contact
counter up/counter down: TTL-signal, switching contact
serial interface
measuring rate: approx. 100 meas./sec. (for standardized signal) resp.
approx. 4 meas./sec. (for temperature and frequency)
meas. resp. display ranges: temperature: Pt100: -200°C to +850°C resp. -50.0 to +200°C
Pt1000: -200°C to +850°C
Typ J: -170°C to +950°C
Typ K: -270°C to +1350°C
Typ N: -270°C to +1300°C
Typ S: -50°C to +1750°C
Typ T: -270°C to +400°C
standardized signals: -1999 to 9999 digits, scale freely adjustable
-recommended range: < 2000 digits
frequency: 0.000Hz to 10kHz, display freely scaleable
rotational speed: 0.000 U/min to 9999 U/min
selectable prescaler 1-1000

counter up/down:

 		countervalue remains on power loss
0 to 9999 (10Mio, with prescaler)
pulse frequency: <10kHz
selectable prescaler: 1-1000

serial interface:

Displaying and controlling from values comming
via the serial interface
accuracy (25°C): standardized signal: <0.2% FS + 1 digit (at 0-50mV: < 0,3% FS + 1 digit)
resistance thermometer: <0.5%FS + 1 digit
thermo couples: <0.3% FS + 1 digit (at type S: <0.5% FS + 1 digit)
point of comparison:  + 1°C
frequency, rotational speed, counter: <0.1% FS + 1 digit
outputs: 2 switching outputs, not electrically isolated
switching behavior: low-side, high-side or push-pull (selectable)
connection data: low-side: 28V/1A; high-side: Ub/200mA
controller state: 2-point, 3-point, 2-point with alarm,
min/max alarm to 1 output, min/max alarm to 2 outputs
switching point, hysteresis:

freely adjustable
response time: < 20msec. at nomalized signals
< 0.5sec. at temperature and frequency
display: approx. 10mm high, 4-digit red LED-display
min/max-value memory: the max- and min value will be stored
push buttons: with 3 push-buttons (after removing the front panel)
optional: FS3T, frontpanel with 3 push-buttons for comfortable configuration.
trouble-free repacement is possible (p.r.t accessories)
interface: serial interface, elect. isolated, EASYBus compatible
miscellaneous: permanent self-monitoring, digital filter function,
measuring range boundary (limit)
voltage supply: 9 to 28 V DC (standard)
option: elec. insulated voltage supply 11 to 14V or 22 to 27V
power consumption: max. 30mA (without outputs)
nominal temperature: +25°C
operating temperature: -20°C to +50°C
relative humidity: 0 to 80% r.h.  (non-condensing)
storage temperature: -30°C to +70°C
housing: glass fibre reinforced Noryl, front panel PC
dimensions: 24 x 48mm (front frame)
mounting depth: approx. 65mm (incl. screw-type/plug-in terminal)
panel mounting: with VA-spring clamp
allowed panel thicknesses from 1mm to approx. 10mm
panel cut-out: 21.7+0.5 x 45+0.45mm (H x W)
connection terminal: screw-type/plug-in terminal incl.:
2-pin for interface and 9-pin for other connections
for wire cross sections from 0.14² to 1.5² mm²
IP rating: front side IP54, with optional sealing rings IP65
noise immunity (EMC): EN61326 (appendix A, class B)

Options (against upcharge):
IS12:

 type with insulated power supply 11-14V
IS24:

 type with insulated power supply 22-27V

 

GIA 20 EB/PK   
 
universal display and regulating device with individual programmable linearisation characteristic line
Even heavily bent sensor characteristics/value curves can be straightened by 30 freely programmable linearisation points.
The adjustment with the measurement size is done via the integrated interface by means of the (gratis receivable) configuration software.
Here only the input parameter (in mA, V, Ω or Hz) and the corresponding displayed value have to be entered.

 

Accessories (against upcharge):
GGD 2448 SET: sealing rings for device mounting IP65 (2 pieces)
FS3T: front panel with 3 push-buttons
for comfortable configuration,
for adjustments at varying switching points,
calling of min- and max-values etc.

GNR 10:  

power supply and relay module for one GIA20EB
(input 230V AC, power supply for device
and transducer, 2 relay outputs)
EBS 9M: software for recording and archivating of
the measuring values from the GIA 20 EB
   

suitable temperature probes:

Don't hesitate to contact us!
suitable transducer: Don't hesitate to contact us

(c) 1999-2010 GSG Geologie-Service GmbH, Wuerzburg  -  www.geologie-service.com
Tel. +49/(0)931 30 40 8-0; FAX: +49/(0)931 99105-90

- All rights reserved -