2-channel difference controller
| specifications: |
| measuring inputs: | (2x) 4 to 20mA, (2x) 0 to 20mA or (2x) 0 to 10V |
|
(Please note the standardized signal wished by you in
your order:) 020 = (2x) 0-20 mA, 420 = (2x) 4-20 mA, 010 = (2x) 0-10V |
|
| display range: |
-1999 to 9999 digit, decimal point, initial and final values freely selectable |
| recommended span; | <2000 digit |
| accuracy: | <0.2% FS +1digit (at nominal temperature = +25°C) |
| measuring rate: | approx. 100 meas./sec. |
| display/regulation: | difference: input 1 - input 2 |
| outputs: |
2 relay outputs, 230V~ switching (standard) output options like solid state steering output or analog output available |
| output functiuns: | |
|
5 or 6, selectable (e.g. 2-point controller, 3-point controller, ...) |
|
| limit values: | |
| freely selectable | |
| display: | approx. 13mm high, 4-digit red LED-display |
| working conditions: | -20°C to +50°C, 0 to 80% r.h. (non-condensing) |
| power supply: | 230V AC, 50/60Hz, approx. 6VA |
| housing: |
standard rack type housing 48 x 96mm (front frame) installation depth: approx. 115mm (screw-type/plug-in terminals incl.) |
| panel mounting: |
with fixing clamps panel cutout: 43,0+0.5 x 90,5+0.5mm (H x W) |
| electrical connection: |
via screw-type/ plug-in terminal: wire diameters from 0.14 to 1.5mm2 |
| protection class: | front side IP54 (IP65 upon request) |
| electromagnetic immunity (EMC): | EN61326 (appendix A, class B) |
| For further technical details p.r.t. GIR 2002 | |
options (against upcharges): |
| output for HLR-connection | (HLR1, HLR2) |
| analog output | (AAG.../..) |
| other voltage supply | |
(c) 1999-2010 GSG Geologie-Service GmbH, Wuerzburg -
www.geologie-service.com
Tel. +49/(0)931 30 40 8-0; FAX: +49/(0)931 99105-90
- All rights reserved -