pressure measuring transducer for over and underpressure for water and air resp. non-aggressive gases, OC-1

Pressure measuring transducer for over and under pressure

OC-1
Application area: Suitable for water, air and non-corrosive gases

Specification:

Measuring range: -1,0 to +1,5 bar, -1,0 to +3,0 bar

Over pres. safety: 5 bar

Output signal: 4 - 20 mA

Auxiliary energy: Uv = 8 to 30 V DC

Perm. impedance: R_A = (U_V (V) - 8V) / 0,02 A

Accuracy: Deviation from parameter (% of span): < 1,0 (error of measurement acc. to IEC 61298-2)
< 0,5 (setting of tolerance band, BFSL)

Non-linearity
(% of span): < 0,4 (setting of tolerance band, BFSL)

Stability / year
(% of span): < 0,3 (at reference conditions)

Operating temperature media: -20 to +85°C

Operating temperature ambient: -20 to +85°C

Compensated temperature range: 0 to +80°C

Temperature coefficient: <0.02% FS/K (typ.) for zero point
<0.15% FS/K (typ.) for span

Materials: case: brass 2.0401

diaphragm: ceramic ALl₂O₃ 96%

sealing ring: NBR

Pressure connection: G 1/4B (= 0,635 cm)

Mounting position: Any (adjusted in vertical mounting position with lower pressure connection)

Electric connection: Standard via elbow-type plug acc. to DIN EN 175301-803, type C

Electric protections: Reverse voltage and short-circuits protection

Accessories (against upcharges):

GWA1214 V4A (1.4571) thread adapter G 1/2" (= 1,27 m)
with internal thread G 1/4" (= 0,635 cm) and external thread G 1/2" (= 1,27 cm)

GDZ-09 Coupling adapter (NW5) made of brass with internal thread G 1/4"(= 0,635 cm)
(suitable for GDZ-12)

GDZ-12 Coupler socket (NW5) made of brass (singel-hand use)
with internal thread G 1/4" (= 0,635 cm)

GDZ-20 Screw-on connection made of brass for 6/4 tube
with internal thread G 1/4" (= 0,635 cm)

GDZ-27 Manometer profile gasket (tickness 3.0mm,Cu) for thread G 1/4" (= 0,635 cm)

GDZ-28 Flat gasket (tickness 1.5mm, Cu) for thread G 1/4" (= 0,635 cm)

GDZ-23 Thread adapter, made of brass
with internal thread G 1/2" (= 1,27 cm)and external thread G 1/4" (= 0,635 cm)

(c) 1999-2010 GSG Geologie-Service GmbH, Würzburg - www.geologie-service.com
Tel. +49/931 30 40 8-0; FAX: +49/931 99105-90

- All rights reserved-

Specification:
Measuring range:	-1,0 to +1,5 bar, -1,0 to +3,0 bar
Over pres. safety:	5 bar
Output signal:	4 - 20 mA
Auxiliary energy:	Uv = 8 to 30 V DC
Perm. impedance:	R_A = (U_V (V) - 8V) / 0,02 A
Accuracy:	Deviation from parameter (% of span):	< 1,0 (error of measurement acc. to IEC 61298-2) < 0,5 (setting of tolerance band, BFSL)
	Non-linearity (% of span):	< 0,4 (setting of tolerance band, BFSL)
	Stability / year (% of span):	< 0,3 (at reference conditions)
Operating temperature media:	-20 to +85°C
Operating temperature ambient:	-20 to +85°C
Compensated temperature range:	0 to +80°C
Temperature coefficient:	<0.02% FS/K (typ.) for zero point <0.15% FS/K (typ.) for span
Materials:	case:	brass 2.0401
	diaphragm:	ceramic ALl₂O₃ 96%
	sealing ring:	NBR
Pressure connection:	G 1/4B (= 0,635 cm)
Mounting position:	Any (adjusted in vertical mounting position with lower pressure connection)
Electric connection:	Standard via elbow-type plug acc. to DIN EN 175301-803, type C
Electric protections:	Reverse voltage and short-circuits protection

Accessories (against upcharges):
GWA1214	V4A (1.4571) thread adapter G 1/2" (= 1,27 m) with internal thread G 1/4" (= 0,635 cm) and external thread G 1/2" (= 1,27 cm)
GDZ-09	Coupling adapter (NW5) made of brass with internal thread G 1/4"(= 0,635 cm) (suitable for GDZ-12)
GDZ-12	Coupler socket (NW5) made of brass (singel-hand use) with internal thread G 1/4" (= 0,635 cm)
GDZ-20	Screw-on connection made of brass for 6/4 tube with internal thread G 1/4" (= 0,635 cm)
GDZ-27	Manometer profile gasket (tickness 3.0mm,Cu) for thread G 1/4" (= 0,635 cm)
GDZ-28	Flat gasket (tickness 1.5mm, Cu) for thread G 1/4" (= 0,635 cm)
GDZ-23	Thread adapter, made of brass with internal thread G 1/2" (= 1,27 cm)and external thread G 1/4" (= 0,635 cm)