standardized signal logger
for programming the recording period individually
standardized signal registration(16.000 meas. values) for transducers etc. |
|
T-Logg 120 W - ...
|
with elbow type plug |
T-Logg 120 K - ...
|
with PG screw-connection and cable |
specifications: |
display range: | -1999 to 9999 digit, freely programmable |
decimal point; | freely settable |
input signal: | only one signal! |
0-2V, 0-10V, 0-20mA or 4-20mA, other input signals upon request | |
(input is not isolated from interface) | |
accuracy: (at nominal temperature = +25°C) |
+ 0.5°C |
sensor: | integrated in device |
display: | 10mm high LCD-display |
recording interval: | from 2 sec. to 5h (freely programmable via software) |
storage capacity: | 16,000 measuring values |
recording time: | 166 days (if interval is 15 min.) |
nominal temperature: | +25°C |
working temperature: | -25°C to +60°C |
storage temperature: | -30°C to +85°C |
battery: | CR2430, exchangeable |
battery service life: | over 3 years (if recording interval is 15 min.) |
interface: | serial interface, 3-pin miniature integral plug |
The T-Logg is not suitable for bus operation and is not compatible with EASYBUS! | |
housing: | 48.5 x 48.5 x 35.5mm (H x W x D) plug not included ABS housing, transparent front of polycarbonate, splash water proof: IP65 |
noise immunity (EMC): | the device meets EN61326 (appendix A, class B), additional error: < 0,5% |
software: |
MINISOFT: |
read out software for T-Logg The software is enclosed with the USB 100
or can be made available The T-Logg can also be served by the software GSOFT 40K. |
accessories: |
USB 3100 | interface converter for direct connection of one T-Logg with the USB-interface of a PC. |
GWH 40K | wall suspension with lock against theft suitable for e.g. T-Logg 100, T-Logg 120 K- ... und T-Logg 160 |
GWH 10 | simple wall suspension, made of stainless steel mount wall suspension at the monitoring point, logger may now be easily put in. |
(c) 1999-2010 GSG Geologie-Service GmbH, Wuerzburg -
www.geologie-service.com
Tel. +49/(0)931 30 40 8-0; FAX: +49/(0)931 99105-90
- All rights reserved -